 |
Lancia Beta Parts Wanted
Page Updated 30/7/2008
|
Best viewed using Internet Explorer Added 30/7/2008 Wanted: Right hand rear 3/4 panel for series 1 or 2 spyder. Can be new (if only !) or used but in good condition. Whole shell considered if relatively rust free. contact stuart_jr@btinternet.com Many thanks Stuart
Added 16/6/2008 Wanted for Lancia Beta HPE IE cold start injector (blue in colour) Regard's Paul Chapman 0207 2724012
Added 10/6/2008 Hi, I am nearing the end of the restoration of my 1977 Spyder S2. I am looking for the long black grille / trim that is inserted in the bonnet just forward of the screen. Also 2 good door cards with the original tan / brown vinyl trim are required. Any help in sourcing these items would be greatly appreciated. If anyone knows where I can obtain original satin silver wiper blades, that would also be very helpful. Many thanks, Carl Jenkins carlthecarman@yahoo.co.uk
Added 25/5/2008
Regards HPERobbo ian.jane.robertson@xtra.co.nz
Added 25/5/2008 Hi there I am Jak Joubert from Pretoria , South Africa. I am in desperate need of a set of tail lights for my 82 Beta Spider. Payment and postage to, could be arranged for within the UK. I could be contacted at jack.joubert@hotmail Thanks Jak, Added 16/4/2008
I urgently
need rear strut top mounting rubbers for a 74 BETA COUPE.
Can you help ?
Added 09/3/2008
Wanted: Limited slip differential preferably ZF type for a
late type beta box.
Thanks,
Added 04/3/2008 Hi I have a 1980 beta spyder and am in desperate need of new carb, can anyone help? also rear pass side lens and of course a hood but hey Im not expecting miracles! cheers John john@zeddstudio.com
Added 27/2/2008 wanted for a 1979 coupe clear front windscreen and rubber seal / two side indicator repeaters, two wiper arms, outside door handles. The beta will be ready for this years show season so hope to see you at as many as possthanks mick. Mickcovill@aol.com
Added 23/2/2008 Wanted: VX compressor for my 83 VX coupe. It's the last piece of the jigsaw, so any condition considered. Please mail me on glennringer@yahoo.co.uk if you have a one lying about in you garage, loft or spare room... Thanks in advance. G
Added 23/2/2008 Beta indicator stalk assembly wanted. chris.richard@doctors.org.uk Many thanks, Chris
Added 17/2/2008
Hi could you please let me know of anyone in your club that would be selling this kind of item? Thank you Gustavo
Added 10/2/2008
Added 01/2/2008 Hi I am looking for a couple of parts for my 1983 Lancia Trevi:
2x new springs for the steering wheel horn push
2x (left & right) C-post "trevi" badges
If anyone has these parts, or could give me a lead as to where I might obtain them, I would be very grateful- (especially the springs)
Many thanks
James
Added 20/1/2008
Hi Added 20/1/2008 I'm need of a offside door quarter light without the mirror holes. If you've got one please contact me on 07974556132 or glennringer@yahoo.co.uk. Cheers Glenn.
Added 04/12/2007 Hi, i need a fuel tank for lancia beta volumex, do you have one? please answer asap and tell me the price. may you send me at least a photo of the item, if you have it? many thanks kind regards, Pietro Fiordelisi Added 04/12/2007 part Wanted for S1 Montecarlo Spyder I'm Looking for either a pair or 1 passenger side roof strap for the above lancia (RHD) Call Stuart on 01244 851849 Thanks Added 04/12/2007 Beta boyz ! Hi, my name is Chandru and i'm an antique dealer & collector based in Bangalore, India. I mostly deal in old wood furniture. I recently bought a 1986 lancia beta HPE 2000 which was parked in a garage for almost 12years without being used, luckly for me it's in good running condition...and i plan to restore it to mint condition. I was wondering if you could help me source some things that i would require to restore the lancia. I need a work shop manual and also a spare parts manual (if not an original then a photocopied one would do) I also need 2 rear view door mirrors and the rear right tail light cover. regards, Chandru. ksc1945@gmail.com
Added 19/11/2007
Added 04/11/2007 Wanted, Montecarlo clutch arm and slave cylinder bracket. Chris Jarvis: 01347 879130 Thank you very much. Chris Jarvis Added 30/09/2007 Hi I am looking for :- Petrol tank for 1982 Beta coupe 2 liter series 2 carburettor model. Fron seat drivers side ..sort of grey twill Mike Lock 01793 812201 m.lock3@ntlworld.com
Added 30/09/2007 Hi I,m looking for a volumex s/c can you help Peter James 01643 703721
Added 30/09/2007 Hi
my name is Lawrence , i
live in Greenwich , London , se10 . I am looking for a expansion bottle , as my one is rusty and leaks . also a black plastic drivers seat . could you help or give me any advice . thanks for your time lawrence 0208 305 9141, 07885 661070 Added 04/09/20 wanted beta screw on petrol cap Please contact mick alfasudtwin 07738334063 or email mickcovill@aol.com Thanks Mick. Added 03/07/2007
Hello, rear light. Can you help me? Thanks.
Marco Losio Added 01/07/2007 Hello, I am looking for a pair of Mk1 Beta coupe door mirrors, preferably in black but so long as they're good enough condition to paint silver will do!. Many Thanks 0113 2798789 Added 26/05/2007 Hi! I owner of Lancia Beta Coupe (year 1981),. I need a "Right Mirror wiht the Glass". If you have one, I`ll buy it. Thanks Marchello marchello79@yahoo.com.ar Added 03/05/2007
Beta exhaust manifold
required, must be in good condition i.e. all 4
manifold studs to be present. Please contact me on
01772-621421 / 07754-047815 or
lawrenceclift@blueyenoder.co.uk. Thanks.
LAWRENCE
Added 16/04/2007 Hi, Does anyone
have a couple of Zagato front wing badges in decent
condition ? Added 12/04/2007 Hi, I'm looking for the yellow plastic cam belt cover for a beta 2000,mine has been damaged at some point and it would be nice to have a complete one. It would also be nice if someone had an after market k&n style air filter for the same. 01255 433950 / 07929121703 or by all means email I00bob@aol.com many thanks...........Bob Added 07/04/2007 Hi Can you use my e mail as a contact: pnoonan1@eircom.net Thanks A Lot Paul Noonan Added 29/03/2007 WANTED 2.0 LTR CRANK IN GOOD CONDITION (STD PIN DIAMETERS IF POSS) Cos Gauci cos@mountune.com Added 21/03/2007 I am looking for good condition seats for my pre-facelift Series 2 Beta Coupe (1977). These are the early type, low-back seats as used in the Series 1 and early Series 2. Any colour considered except greys or blues. I think my existing seats were originally orange/red but these have faded in the sunlight to a biscuit colour. As I may have to re-trim my existing seats, any information on Lancia seat fabrics or Lancia's trim suppliers would be gratefully received. I am also interested in cloth samples or red/orange/brown colour seats in poor condition that could give me a sample to match. Contact Steve on 07802 577950 or email headofpublications@yahoo.co.uk Added 16/03/2007 I am looking for good condition seats for my pre-facelift Series 2 Beta Coupe (1977). These are the early type, low-back seats as used in the Series 1 and early Series 2. Any colour considered except greys or blues. I think my existing seats were originally orange/red but these have faded in the sunlight to a biscuit colour. As I may have to re-trim my existing seats, any information on Lancia seat fabrics or Lancia's trim suppliers would be gratefully received. I am also interested in cloth samples or red/orange/brown colour seats in poor condition that could give me a sample to match. Contact Steve on 07802 577950 or email headofpublications@yahoo.co.uk Added 10/03/2007 Hi I am in need of a
right rear door mirror and Glass green tint with thanks uros, Slowenia Uroš Hroval
Added 04/03/2007 New/very good used exhaust system for 2000 s.2 spider or coupe reqd. Actually only really need front pipe/centre section since have new rear section but will look at anything inc. stainless steel. Also require good spare wheel cover. Pls.email me at colin@colinblaikie.co.uk or tel. 07850 713861. Added 03/03/2007 WANTED. COUPE BONNET Does anyone have a decent coupe bonnet available. My car is an 81 Spyder that I am just starting to restore. The current bonnet is fair but is starting to go along the leading edge and corners. If I can get a decent bonnet, I can concentrate my time on other areas. Prepared to pay a reasonable price and travel to collect. Thanks. Call Ian on 0191 3891828 / 07989 968914 Email ian@frosti.freeserve.co.uk Added 02/03/2007
Hi, I
am looking for a Volumex Supercharger preferably in good
condition although I will consider any units offered.
Please contact me either on '07957 251950' or email
pat.boghossian@ba.com if you can help.
Added 23/02/2007 Wanted:
Fuse Box for IE model - must be a good one obviously
ie must be from working car etc.....? Contact
details first (07917 107979), Cheers Stevie
Added 05/05/2007 I have a lancia beta spyder which the windsreen pillars & the panel below the windscreen have started to corrode & hole. I was wondering if anybody had a usuable windscreen surround and bottom panel off a scrapped body shell I could purchase to help repair my car. My contact e mail address is jezhildred@msn.com or mobile UK 07896 750253
Added 20/01/2007 Wanted one Exhaust valve, new or good used one will do for a volumex 2.0 engine (sodium filled) thanks Cos cos@mountune.com Added 15/01/2007 Hi there
Many Thanks
Added 04/01/2007 Hi I wonder if anyone
can help me, I am looking for a right hand side tail Thanking you Added 23/11/2006
Hi, Added 23/11/2006 Hi I have a Lancia Beta Berlina, 1800 cc from 1974 and I am looking for a left interior front optic (CIBIÉ). Do you think you
could help me finding it? Lisbon, Portugal
Added 29/9/2006 I have a Lancia Beta HPE 1.6 from 1983 and I need some parts since the entire right side was hit by another car so actually I have to replace all metal parts in that side. It will be very helpful if you can let me know if you have the parts that are listed below (or you know where I can get them) and what is the price of each part. Parts needed:
1)
Front
right head light Thank you very much for your help Added 29/9/2006 Does anyone out there have any coupe/HPE door cards in good or better condition in the blue twill colour, I have two projects that need some far better ones. Also a pair of rear cards , in blue twill too for a HPE. drivers HPE door and Passenger door wanted must be in good condition. Also S2 coupe/HPE front valance wanted must be damage/rust free. please email Mark Wastnidge at lancianut@msn.com Added 20/9/2006 hi i am looking for a passenger side quarter lite window for my lancia beta coupa spider 1979 and also a rear window with or without mechanisme my name is tommy and you can contact me on 07886547018 or carneytommy@aol.com thank you Added 15/8/2006
Hi, would anyone have a Volumex
Supercharger for sale, any condition considered ?
Added 12/7/2006 Hi there, I need an 1800 block and crank for my coupe. please mail me on glennringer@yahoo.co.uk or tel 07974556132. Cheers G Added 30/6/2006 Hi wanted complete volumex engine and supercharger gear box not important or rotted out car etc Tim Smith tim0020@onetel.net
Added 30/6/2006
Hi I need a carburettor for my Montecarlo series 2 Mr. Simon Tack TEL: 01932 240550 FAX: 01932 240639 MOB: 07903 133 745
Added 30/5/2006
Wanted: Fuel Tank for Lancia Beta Coupe VX, 1984 Regards: Trevor Smith 01298 872229 Derbyshire, UK Added 23/5/2006 Hi I'm looking for a pair of side rubbing strips for an early 78 Spider. Preferably in good condition and with the fixings. Stuart stuart_jr@btinternet.com Added 23/5/2006
i need a passenger door in good
condition light rust okay ut solid for a coupe
thanks for your help
tel: 07973 189 483 Added 15/5/2006 Looking for 2 x weber 40 or 44 DCNF to fit an alquati manifold. Please contact at markv3719@hotmail.com or +32 475761691. Thanks Mark
|
||
|---|---|---|
|
If you have any parts to put on this site please email me, if outside UK please give location.
|
Please email me: tony@mylancia.co.uk with parts you may need or have for sale.
